Reset a Deco unit: Method 1: From the Network page in the Deco app, tap the network map first, then tap the Deco unit that you want to reset, and then tap the button in the top right corner. Click Remove to reset the Deco unit. Method 2: Press the Reset button which on the bottom of the Deco unit for 1s to reset it. 1. Connect all of your devices to the extended network, and make sure the router’s Link LED remains lit. 4. On your router, add all the Online Devices’ MAC addresses to your router’s MAC filter table. 5. Enable the router’s MAC filter, wireless access control, or ACL to complete the configuration. TP-LINK's Tether app lets you conveniently access the router and: View information about the clients on your network. Block network access from specific users or devices. Set up Parental Control with access time and content restrictions. Change the basic wireless network settings easily. Scan the QR code and download the TP-LINK Tether App from 2. If you fail to download the firmware online, you can download it directly from the TP-Link official website. And manually upgrade the firmware as Case 1. Online upgrade through web management page: Step 1. Connect your device to the TP-Link wireless router either via Ethernet or wirelessly. Follow these steps: Turn your router around so that you can see the back panel. Use a pin, pen, or anything small enough to press the Reset button. Press and hold for at least 10 seconds. Release the Reset button and allow the router to reset. After one or two minutes at most, the process should be complete. PTaTi.

reset tp link router